當前，在發電廠、住宅樓的低壓配電工作環境下，普遍使用抽屜式低壓開關柜，特別是MNS抽屜式低壓開關柜得到了廣泛應用。雖然業內生產MNS低壓抽屜柜的廠家很多，但技術和質量參差不齊，抽屜式開關柜的設計和組裝存在隱患，下面簡單說一下MNS低壓抽屜柜的其他故障原因分析。

Currently, in the low-voltage distribution working environment of power plants and residential buildings, drawer type low-voltage switchgear is widely used, especially MNS drawer type low-voltage switchgear has been widely used. Although there are many manufacturers in the industry that produce MNS low-voltage drawer cabinets, their technology and quality are uneven, and there are safety hazards in the design and assembly of drawer type switchgear. Below is a brief analysis of other fault causes of MNS low-voltage drawer cabinets.

在使用中，機柜內的溫度太高，高負荷運行，導體長時間流動，機柜缺乏維護，導致積灰嚴重，整體散熱差，無，配電室無空調制冷設施，開關本體和導線高溫運行，導致整體性能下降，使用壽命縮短，以及設備和線路的老化等都會使低壓柜產生故障。如配電室從正式投入運行今，已經連續運行了十幾年，因運行條件不符合停電檢查條件而長期連續運行，核心部件沒有及時維護、測試更換、線路老化、使用壽命降低， 抽屜柜內進出線的導線應為普通低壓電纜或包絕緣熱縮管的銅排，并按相關標準安裝，配電室應確保設備監控系統開啟，以便訪問和檢查設備的運行狀態。

In use, the temperature inside the cabinet is too high, high load operation, prolonged conductor flow, lack of maintenance in the cabinet, resulting in severe dust accumulation, poor overall heat dissipation, lack of dehumidification, lack of air conditioning and refrigeration facilities in the distribution room, high temperature operation of the switch body and wires, resulting in overall performance degradation, shortened service life, and aging of equipment and circuits, all of which can cause faults in the low-voltage cabinet. Since its official operation, the distribution room has been in continuous operation for more than ten years. Due to operating conditions that do not meet the power outage inspection conditions, the core components have not been maintained, tested and replaced in a timely manner, the circuit has aged, and the service life has decreased. The wires for the incoming and outgoing lines in the drawer cabinet should be ordinary low-voltage cables or copper bars wrapped with insulated heat shrink tubes, and installed according to relevant national standards. The distribution room should ensure that the equipment monitoring system is turned on, In order to access and check the operational status of the device.

統計分析歷史數據，對標實際運行數據，及時發現異常，隱患，同時，配電室應加強送排風系統的管理，送排風的功率和效率應滿足正常運行的要求，應定期檢查配電室運行的低壓柜的質量，尤其是內部開關、銅線、接插件，必要時更換核心部件。配電室承載的負荷應分類并逐一標記，對非常重要和重要的負荷應增加必要的保護裝置，并制定和實施有針對性的運行和檢查計劃，組織運行維護人員和配電室管理人員定期檢查。有效的技能培訓，如配電室運維知識、應急處理、防護等，并定期進行應急演練和實戰考核，提高人員處置突發事件的技能和能力。

Statistical analysis of historical data, benchmarking of actual operating data, timely detection of anomalies, elimination of hidden dangers, and strengthening of the management of the supply and exhaust system in the distribution room. The power and efficiency of the supply and exhaust system should meet the requirements of normal operation. The quality of the low-voltage cabinets in the distribution room should be regularly checked, especially internal switches, copper wires, and connectors, and core components should be replaced if necessary. The loads carried by the distribution room should be classified and marked one by one. Necessary protective devices should be added for very important and important loads, and targeted operation and inspection plans should be developed and implemented. Regular inspections should be organized by operation and maintenance personnel and distribution room management personnel. Effective skill training, such as knowledge of power distribution room operation and maintenance, emergency response, safety protection, etc., and regular emergency drills and practical assessments are conducted to comprehensively improve personnel's skills and abilities in handling emergencies.

感謝您的閱讀，此文的文章來源：濟南MNS低壓抽屜柜更多的內容和問題請點擊： http://www.qfpsy.com 我們會繼續努力的為您提供服務，感謝您的支持！

Thank you for reading. The source of this article is Jinan MNS low-voltage drawer cabinet. For more information and questions, please click: http://www.qfpsy.com We will continue to work hard to provide you with services. Thank you for your support!